Removal Procedure
- Remove the washer solvent from the washer solvent container.
- Disconnect the rear washer
pump electrical connector.
- Disconnect the rear washer pump hose.
- Using a small flat-bladed
tool, remove the rear washer pump from the washer solvent container.
- Using a small flat-bladed tool, remove the seal from the washer
solvent container.
Installation Procedure
- Position the seal to the
washer solvent container, pressing in until fully seated.
- Position the rear washer pump to the washer solvent container,
pressing in until fully seated.
- Connect the rear washer
pump hose.
- Connect the rear washer pump electrical connector.
- Fill the washer solvent container with washer solvent.