GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2005
🢒
Uplander - 4WD
🢒
Brakes
🢒
Park Brake
🢒 Parking Brake Cable Equalizer Replacement
Removal Procedure
Caution:
Refer to
Park Brake Cable to Caliper Caution
in the Preface section.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Disconnect the park brake cable and adjustment stud assembly from the equalizer assembly by removing the equalizer nut from the adjustment stud.
Disconnect the front park brake cable (1) from the rear park brake cable (3) at the connector clip (2).
Remove the equalizer assembly from the park brake cable.
Installation Procedure
Install the equalizer assembly to the front park brake cable.
Connect the front park brake cable (1) to the rear park brake cable (3) at the connector clip (2).
Connect the park brake cable and adjustment stud assembly to the equalizer assembly by installing the equalizer adjustment nut.
Adjust the Park Brake System. Refer to
Park Brake Adjustment
.
Lower the vehicle.