GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Uplander - 4WD 🢒 Steering 🢒 Steering Wheel and Column 🢒 Tilt Lever Replacement

Removal Procedure
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the lower trim cover. Refer to Steering Column Trim Covers Replacement .
  3. Remove the tilt lever spring (2).
  4. Remove the retaining bolt (3) from the tilt lever.

    5. Object Number: 1536526 Size: SH
  5. Remove the tilt lever (1).

Installation Procedure

    Object Number: 1536526 Size: SH
  1. Install the tilt lever (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the retaining bolt (3) to the tilt lever.

    3. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  3. Install the tilt lever spring (2).
  4. Install the lower trim cover. Refer to Steering Column Trim Covers Replacement .
  5. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.