Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the rear seats by pulling on the release handle and lifting out of the vehicle.
2. Remove the rear liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement .

1

Cover, Rear Seat Shoulder Belt Guide Trim

2

Bolt, Rear Seat Shoulder Belt Guide

Tighten
50 N·m (37 lb ft)

3

Cover, Rear Seat Shoulder Belt Retractor Trim

4

Bolt, Rear Seat Shoulder Belt Anchor

Tighten
43 N·m (32 lb ft)

5

Bolt, Rear Seat Shoulder Belt Retractor

Tighten
43 N·m (32 lb ft)

6

Belt Assembly, Rear Seat Shoulder

Tip
Lift up and pull out the retractor to disengage it from the body.