GM Service Manual Online
For 1990-2009 cars only

Object Number: 1527708  Size: LF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Seat Back Cover Replacement

Preliminary Procedures

    • Remove the seat from the vehicle.
    • Remove the seat back trim panel. Refer to Head Restraint, Seat Belt Exit Bezel and Seat Back Trim Panel Replacement - Rear No 2 .
    • Remove the seat belt exit bezel. Refer to Head Restraint, Seat Belt Exit Bezel and Seat Back Trim Panel Replacement - Rear No 2 .

1

Bolt, Seat Cushion Frame (Qty: 2)

Tighten
9 N·m (80 lb in)

2

Cover, Seat Back

Tip

  1. Move the seat cushion forward out of the way.
  2. Remove the seat belt anchor bolt. Refer to
  3. Release the J-channel retainer at the bottom of the seat back cover.
  4. Cut the hog rings securing the cover to the seat back pad.
  5. Feed the seat belt trough the opening in the cover.
  6. Feed the seat back release handle through the opening in the seat back cover.

Seat Back Cushion Pad Replacement

Preliminary Procedures

    • Remove the seat from the vehicle.
    • Remove the seat back trim panel. Refer to Head Restraint, Seat Belt Exit Bezel and Seat Back Trim Panel Replacement - Rear No 2 .
    • Remove the seat belt exit bezel. Refer to Head Restraint, Seat Belt Exit Bezel and Seat Back Trim Panel Replacement - Rear No 2 .

1

Bolt, Seat Cushion Frame (Qty: 2)

Tighten
9 N·m (80 lb in)

2

Cover, Seat Back Cushion

Tip

  1. Move the seat cushion forward out of the way.
  2. Remove the seat belt anchor bolt. Refer to
  3. Release the J-channel retainer at the bottom of the seat back cover.
  4. Cut the hog rings securing the cover to the seat back pad.
  5. Feed the seat belt trough the opening in the cover.
  6. Feed the seat back release handle through the opening in the seat back cover.

3

Pad Assembly, Seat Back Cushion