GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Uplander - 4WD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure
  1. Remove the left-side instrument panel insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages and Console.
  2. Remove the left-side carpet retainer. Refer to Door Sill Plate Replacement in Interior Trim.

    3. Object Number: 181465 Size: SH
  3. Remove the park brake indicator switch electrical connector.
  4. Remove the park brake indicator switch screw.
  5. Remove the parking brake indicator switch.

Installation Procedure
  1. Install the park brake indicator switch.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the park brake indicator switch screw.

    3. Tighten
    Tighten the screw to 3 N·m (27 lb in).


    Object Number: 181465 Size: SH
  3. Install the park brake indicator switch electrical connector.
  4. Install the left-side carpet retainer. Refer to Door Sill Plate Replacement in Interior Trim.
  5. Install the left-side instrument panel insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages and Console.