GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Uplander - 4WD 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Floor Air Outlet Duct Replacement - Center

Removal Procedure

    Object Number: 1547645 Size: SH
  1. Remove the front seats. Refer to Front Seat Replacement - Bucket in Seats.
  2. Remove the door sill plates. Refer to Door Sill Plate Replacement in Interior Trim.
  3. Remove the instrument panel (I/P) insulator panel right and left side. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages and Console.
  4. Remove the cowl side panels. Refer to Cowl Side Trim Panel Replacement in Interior Trim.
  5. Remove the center console front cover and side covers.
  6. Remove the floor duct (3) from the center floor duct (2).
  7. Remove the console reinforcement.
  8. Reposition the front of the carpet rearward.
  9. Remove the floor duct brace nuts (1).
  10. Remove the floor duct brace (2).
  11. Remove the center floor duct (2).

Installation Procedure

    Object Number: 1547645 Size: SH
  1. Install the center floor duct (2).
  2. Install the floor duct brace (2).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the floor duct brace nuts (1).

    4. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  4. Install the floor duct (3) to the center floor duct (2).
  5. Install the console reinforcement.
  6. Install the center console front cover and side covers.
  7. Position the front of the carpet forward.
  8. Install the front cowl panel. Refer to Cowl Side Trim Panel Replacement in Interior Trim.
  9. Install the I/P insulators. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages and Console.
  10. Install the door sill panels. Refer to Door Sill Plate Replacement in Interior Trim.
  11. Install the front seats. Refer to Front Seat Replacement - Bucket in Seats.