GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Uplander - 4WD 🢒 Preface 🢒 Cautions and Notices 🢒 Cruise Control Switch Replacement

Removal Procedure
  1. Remove the steering wheel from the vehicle. Refer to Steering Wheel Replacement .

    2. Object Number: 1539231 Size: SH
  2. Remove the steering wheel electrical harness grounding screw (1).
  3. Release the electrical harness connector retainer clip (2) from the steering wheel trim cover.

    4. Object Number: 1539232 Size: SH
  4. Remove the steering wheel rear trim cover screws (4).
  5. Remove the cruise control switch screws (2).
  6. Remove the steering wheel trim cover (3).
  7. Remove the cruise control switch (1).

Installation Procedure

    Object Number: 1539232 Size: SH
  1. Install the cruise control switch (1).
  2. Install the steering wheel trim cover (3).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the cruise control switch screws (2).

    4. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  4. Install the steering wheel rear trim cover screws (4).

    5. Tighten
    Tighten the screws to 6 N·m (53 lb in).


    Object Number: 1539231 Size: SH
  5. Install the steering wheel electrical harness grounding screw (1).

    6. Tighten
    Tighten the screw to 6 N·m (53 lb in).

  6. Attach the electrical harness connector retainer clip (2) to the steering wheel trim cover.
  7. Install the steering wheel to the vehicle. Refer to Steering Wheel Replacement .