Rear Side Door Actuator Control Module Replacement for Chevrolet Venture 1999

1. Remove the right rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .



2. Disconnect the electrical connectors from the Power Sliding Door (PSD) actuator control module (2).
3. Pull the PSD actuator control module (2) inboard in order to unhook the control module from the actuator motor.

1. Push the PSD actuator control module (2) outboard in order to unhook the control module from the actuator motor.
2. Install the PSD actuator control module electrical connectors.
3. Perform the reinitialization procedure. Refer to Power Sliding Door (PSD) Re-Initialization .
4. Install the right rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .