GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Venture 🢒 Engine 🢒 Engine Mechanical - 3.4L 🢒 Valve Lifter Replacement

Removal Procedure
  1. Remove the engine left side valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Left Side .
  2. Remove the engine right side valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Right Side .
  3. Remove the upper intake manifold. Refer to Upper Intake Manifold Replacement .
  4. Remove the lower intake manifold. Refer to Lower Intake Manifold Replacement .
  5. Remove the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .

    6. Object Number: 61836 Size: SH
  6. Remove the lifter guide bolts.
  7. Remove the lifter guide.

    8. Important: Place the valve train parts in a rack in order to ensure that they are installed in the same location from which they were removed.

  8. Remove the lifter(s).

Installation Procedure

    Object Number: 54701 Size: SH
  1. Coat the valve lifters using prelube GM P/N 1052365 or the equivalent.
  2. Install the valve lifters in their original locations.
  3. Apply threadlock GM P/N 12345382 or the equivalent to the threads.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the valve lifter guides and guide bolts.

    5. Tighten
    Tighten the valve lifter guide bolts to 10 N·m (89 lb in).

  5. Install the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
  6. Install the lower intake manifold. Refer to Lower Intake Manifold Replacement .
  7. Install the upper intake manifold. Refer to Upper Intake Manifold Replacement .
  8. Install the engine right side valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Right Side .
  9. Install the engine left side valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Left Side .