Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the automatic level
control air compressor filter (1) from the underbody rail (squeeze the clips
on side of the filter and pull the filter out of the hole in the rail).
- Remove the automatic level control air compressor filter (1) from
the hose.
Installation Procedure
- Install the automatic
level control air compressor filter (1) to the hose.
Important: In order to prevent water entry into the automatic level control air
compressor, snap the filter completely into the rail during installation.
- Install the automatic level control air compressor filter to the underbody
rail.
- Lower the vehicle.