GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Venture 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Transmission Fluid Filler Tube Replacement

Removal Procedure
  1. Remove the oil indicator from the filler tube.
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls-3.4 L.

    3. Object Number: 368795 Size: MH
  3. Remove the retaining nut from the EGR at the top of the filler tube.
  4. Remove the lower retaining bolt at the base of the filler tube.
  5. Remove the fluid filler tube.

Installation Procedure

    Important: Do NOT place the fluid filler tube seal on the fluid filler tube when installing the tube or damage to the seal will result.


    Object Number: 368794 Size: SH
  1. Install the fluid filler tube seal in the transaxle.
  2. Position the fluid filler tube into the transaxle.

    3. Object Number: 368795 Size: MH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the fluid filler tube bracket bolt through the fluid filler tube bracket.

    4. Tighten
    Tighten the fluid filler tube bracket bolt to 13 N·m (115 lb in).

  4. At the top of the filler tube Install the retaining nut to the filler tube the EGR at the top of the filler tube.
  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls-3.4 L.
  6. Inspect for proper fluid level.
  7. Inspect for fluid leaks.