- Remove the steering column tilt head assembly. Refer to
Steering Column Tilt Head Housing - Disassemble - Off Vehicle
.
- Slide the PASSKEY®
III (2) off of the electronic lock module assembly (1).
- Remove the key alarm connector (1)
from the electronic lock module assembly (2).
- Remove the two tapping screws from the ignition key alarm
switch assembly (3).
- Let both parts hang freely.
- Remove the park lock cable
assembly (1) from the electronic lock module assembly.
- Remove the three pan
head tapping screws (2) from the electronic lock module assembly (1).
- Remove the electronic lock module assembly (1).