GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2001
🢒
Venture
🢒
Body and Accessories
🢒
Wipers/Washer Systems
🢒 Rear Washer Hose Replacement
Removal Procedure
Remove the right cowl trim panel. Refer to
Cowl Side Trim Panel Replacement
in Interior Trim.
Remove the right lower center trim panel. Refer to
Center Pillar Lower Trim Panel Replacement
in Interior Trim.
Remove the right rear lower quarter trim panel. Refer to
Rear Quarter Lower Trim Panel Replacement
in Interior Trim.
Remove the liftgate trim panel. Refer to
Liftgate Trim Panel Replacement
in Body Rear End.
Remove the wiper module cover. Refer to
Wiper Module Cover Replacement
.
Disconnect the hose from the rear washer pump.
Disconnect the hose from the washer solvent container.
Using a small flat-bladed tool, remove the rear washer nozzle (2).
Disconnect the hose (1) from the nozzle (2).
Pull the hose end out through the rear liftgate conduit.
Pull the hose end out through the opening in the dash panel.
Remove the hose from the right side of the vehicle.
Installation Procedure
Route the rear washer hose along the right side of the vehicle.
Apply lubricant to the rear washer hose ends.
Install the hose end through the opening in the dash panel.
Connect the hose to the washer solvent container.
Connect the hose end to the rear washer pump.
Route the hose (1) opposite end through the rear liftgate conduit.
Connect the hose (1) to the rear washer nozzle (2).
Position the nozzle to the liftgate.
Press in firmly to install the nozzle to the liftgate.
Install the wiper module cover. Refer to
Wiper Module Cover Replacement
.
Install the liftgate trim panel. Refer to
Liftgate Trim Panel Replacement
in Body Rear End.
Install the rear lower quarter trim panel. Refer to
Rear Quarter Lower Trim Panel Replacement
in Interior Trim.
Install the lower center trim panel. Refer to
Center Pillar Lower Trim Panel Replacement
in Interior Trim.
Install the right cowl trim panel. Refer to
Cowl Side Trim Panel Replacement
in Interior Trim.