Removal Procedure
- Remove the front door trim panel. Refer to
Door Trim Panel Replacement
.
- Remove the front door water deflector. Refer to
Front Side Door Water Deflector Replacement
.
- Remove the front door
inside handle spring from its retainer clip.
- Using a small flat-bladed
tool, remove the front door inside handle from the lock module.
- Pull back on the door
inside handle assembly.
- Separate the upper and
lower portions from each other. Slide the upper and lower portions off the
lock rods.
Installation Procedure
- Replace the upper and
lower portions on the lock rods. Slide the upper and lower portions together.
- Reattach the door inside
handle assembly to the lock module.
- Reattach the front door
inside handle spring to its retainer clip.
- Install the front door water deflector. Refer to
Front Side Door Water Deflector Replacement
.
- Install the front door trim panel. Refer to
Door Trim Panel Replacement
.