GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Venture 🢒 Engine 🢒 Engine Electrical 🢒 Daytime Running Lights (DRL) Control Module Replacement

Removal Procedure
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Object Number: 318092 Size: SH
  2. Remove the instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side.

    3. Object Number: 318094 Size: SH
  3. Slide the daytime running lamp module from the bracket.
  4. Disconnect the electrical connectors.

Installation Procedure

    Object Number: 318092 Size: SH
  1. Position the daytime running lamp module in the bracket.

    2. Object Number: 318094 Size: SH
  2. Slide the daytime running lamp module into the bracket in order to secure the module.
  3. Connect the electrical connectors.
  4. Install the instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
  6. Refer to Control Module References for programming and setup information.