Rear Seat Audio (RSA) Without Entertainment System
This feature allows rear seat passengers to listen to and control any of the
sources: radio and CDs. However, the rear seat passengers can only control the sources
that the front seat passengers are not listening to. For example, rear seat passengers
may listen to and control a CD through headphones, while the driver listens to the
radio through the front speakers. The rear seat passengers have control of the volume
for each set of headphones.
The front seat audio controls always have priority over the RSA controls. If
the front seat passengers switch the source for the main radio to a remote source,
the RSA will not be able to control the remote source. You can operate the RSA when
the main radio is off.
Primary Radio Controls
The following function is controlled by the main radio:
PWR (Power): Press this knob twice to turn RSA off.
Rear Seat Radio Controls
The following functions are controlled by the RSA system:
PWR (Power): Press this button to turn the system on or off.
The rear speakers will be muted when the RSA power is turned on.
VOL (Volume): Press this knob lightly so it extends. Turn the
knob to increase or to decrease the volume. Push the knob back into it's stored position
when you are not using it. The upper knob controls the upper headphones and the lower
knob controls the lower headphones.
BAND: Press this button to switch between FM1, FM2, AM, or XM1
or XM2 (if equipped). If the front passengers are already listening to the radio,
the RSA will not switch between the bands and cannot change the frequency.
Press this button to play a CD when listening to the radio.
SEEK : When listening to the radio,
press the up or the down arrow to go to the next or the previous station and stay
there. This function is inactive if the front seat passengers are listening to the
radio.
To scan stations, press and hold either SEEK arrow until the radio
goes into scan mode. The radio will go to a station, play for a few seconds, then
go on to the next station. Press SEEK again to stop scanning. This function is inactive
if the front seat passengers are listening to the radio.
When a CD is playing, press the up arrow to go to the next track on the CD.
Press the down arrow to go to the start of the current track if more than eight seconds
have played. This function is inactive if the front seat passengers are listening
to a CD.
P.SET PROG (Preset Program): Press this button to scan the preset
radio stations set on the pushbuttons on the main radio. The radio will go to a preset
station stored on the pushbuttons, play for a few seconds, then go on to the next
preset station. Press this button again to stop scanning presets. This function is
inactive if the front seat passengers are listening to the radio.
When
a CD is playing in the six-disc CD changer, press this button to select the next CD,
if multiple CDs are loaded. This function is inactive if the front seat passengers
are listening to a CD.
When an MP3 CD is playing, press this button to go to the next folder. This
function is inactive if the front seat passengers are listening to a CD.
TAPE CD: Press this button to play a CD when listening to the
radio.
Rear Seat Audio (RSA) With Entertainment System
This feature allows rear seat passengers to listen to and control any of the
sources: radio, CDs, DVD, and auxiliary device. However, the rear seat passengers
can only control the sources that the front seat passengers are not listening to.
For example, rear seat passengers may listen to and control a CD through headphones
while the driver listens to the radio through the front speakers. The rear seat passengers
have control of the volume for each set of headphones.
The front seat audio controls always have priority over the RSA controls. If
the front seat passengers switch the source for the main radio to a remote source,
the RSA will not be able to control the remote source. You can operate the RSA when
the main radio is off.
The DVD or auxiliary device will always be available on channel A of the headphones.
All other sources are available on channel B. You will not be able to listen to XM,
on channel B, if you are listening to a DVD or an auxiliary device on channel B and
vice versa.
RSA PWR (Power): Press this button to turn the system on or
off. The headphone symbol will appear on the display above the video screen when the
system is on. The rear speakers will be muted when the RSA power is turned on.
BAND: Press this button to switch between FM1, FM2, AM, or XM1
or XM2 (if equipped) when the headphones are on channel B. The selected radio station
will appear on the display above the video screen. If the front passengers are listening
to the radio, the RSA will not switch between the bands and cannot change the station.
(Tune): When listening to the radio,
press the right or the left arrow to go to the next or the previous station and stay
there. This function is inactive if the front seat passengers are listening to the
radio.
When a CD is playing, press the right arrow to go to the next track
on the CD. Press the left arrow to go to the start of the current track, if more than
eight seconds have played. This function is inactive if the front seat passengers
are listening to a CD.
P.SET SCAN (Preset Scan): Press and hold this button to scan
the preset radio stations set on the pushbuttons on the main radio. The radio will
go to a preset station stored on the pushbuttons, play for a few seconds, then go
on to the next preset station. The selected radio station will appear on the display
above the video screen. Press this button again to stop scanning presets. This function
is inactive if the front seat passengers are listening to the radio.
When a CD is playing in the six-disc CD changer, press this button to select the next
CD, if multiple CDs are loaded. This function is inactive if the front seat passengers
are listening to a CD.
CD TAPE: Press this button to switch between playing a CD, a
DVD, or an auxiliary device when the headphones are on channel B. If one of the devices
are not loaded, the system will skip over the device when this button is pressed.