Electronic Column Lock Module Replacement for Chevrolet Venture Ext. 1998

1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
2. Remove the tilt lever. Refer to Tilt Lever Replacement - On Vehicle .
3. Remove the steering wheel. Refer to Steering Wheel Replacement .
4. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
5. Remove the steering column trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .
6. Remove the lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle .

1. Install the lock module assembly. Refer to Electronic Column Lock Module - Assemble - Off Vehicle .
2. Install the steering column trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .
3. Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
4. Install the steering wheel. Refer to Steering Wheel Replacement .
5. Install the tilt lever. Refer to Tilt Lever Replacement - On Vehicle .
6. Enable the SIR system. Refer to Enabling the SIR System in SIR.