Tools Required

J 38400 Brake Shoe Spanner and Spring Remover

Caution: Keep fingers away from rear brake shoe springs to prevent fingers from being pinched between spring and shoe web or spring and backing plate.

1. Remove the brake drum. Refer to Brake Drum Replacement .




Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.

2. Use the J 38400 in order remove the adjuster spring (1). Disengage the adjuster spring loop from the tab on the adjuster actuator.

2.1.	Remove the loop end of the adjuster spring from the adjuster actuator.

2.2.	Remove the straight end of the adjuster spring from the secondary brake shoe.




3. Use the J 38400 in order to spread the brake shoes apart.
4. Remove the adjuster.

1. Use the J 38400 in order to spread the brake shoes apart.




Important: Ensure that the adjuster (2) engages the brake shoes (4 and 5), the park brake actuator (3), and the adjuster actuator (1) properly.

2. Install the adjuster.




Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.

3. Use the J 38400 in order to install the adjuster spring (1).

3.1.	Install the straight end of the adjuster spring into the secondary brake shoe.

3.2.	Install the loop end of the adjuster spring to the adjuster actuator.

4. Install the brake drum. Refer to Brake Drum Replacement .