- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the wire harness assembly (4)
from the wire harness strap (5).
- Remove the wire harness straps (3) from the wire harness
assembly (4).
- Remove the wire harness strap (2) from the upper tilt head
assembly (1).
- Slide the 2 connectors (2)
of the turn signal and multifunction switch assembly off of the bulk head
connector (1).
- Remove the 2 pan head tapping
screws.
- Remove the turn signal and multifunction
switch assembly.