Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting System Diagnostic System Check? | -- | Go to Step 2 | |
2 | Do the rear fog lamps operate properly? | -- | Go to Step 3 | |
3 |
Does the Rear Fog Lamp indicator illuminate when performing this function? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 4 |
4 | Using a test lamp check for a poor connection or open in the signal circuit of the rear fog lamp. Refer to Circuit Testing in Wiring Systems. Is a poor connection or open present? | -- | Go to Step 5 | Go to Step 6 |
5 | Repair the poor connection or open in the signal circuit of the rear fog lamp. Refer to Wiring Repairs or Connector Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 7 | -- |
6 | Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges, and Console. Important: Perform the set up procedure for the IP. Did you complete the replacement and the set up procedure? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
