Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the instrument cluster diagnostic system check? | -- | ||
2 | Verify the CHECK ENG OIL LEVEL message is always on. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 |
Does the engine oil level message data value indicate OK? | -- | ||
4 |
Important: Perform the set up procedure for the replacement IPC. Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement and the set up procedure? | -- | -- | |
5 |
Does the test lamp illuminate? | -- | ||
6 |
Does the test lamp illuminate? | -- | ||
7 |
Important: Perform the reprogramming procedure for the replacement PCM. Replace the PCM. Refer to Powertrain Control Module Replacement/Programming in Engine Controls - 3.4L. Did you complete the replacement and the set up procedure? | -- | -- | |
8 | Repair a short to ground in the signal circuit of the engine oil level indicator switch. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
9 | Replace the engine oil level indicator switch. Refer to Engine Oil Level Sensor and/or Switch Diagnosis in Engine Controls-3.4L. Did you complete the repair? | -- | -- | |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
