Tools Required

J 38778 Door Trim Pad Clip Remover

Important: The defroster door must be closed to allow clearance during defroster duct removal.

1. Set the HVAC controls in the VENT mode to close the defroster door.
2. Remove the IP carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.



3. Remove the side window defogger ducts from the defroster outlet duct.



4. Using the J 38778 remove the defroster outlet duct retaining clips.
5. Remove the defroster outlet duct from the IP carrier.

1. Position the defroster outlet duct to the IP carrier.
2. Connect the defroster outlet duct retaining clips.



3. Install the side window defogger ducts to the defroster outlet duct.
4. Install the IP carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.