GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 294318  Size: SH
  1. Roll back the automatic transmission range selector lever seal.
  2. Remove the automatic transmission range selector lever screw.
  3. Remove the automatic transmission range selector lever.

Installation Procedure


    Object Number: 294318  Size: SH
  1. Install the automatic transmission range selector lever.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the automatic transmission range selector lever screw.
  4. Tighten
    Tighten the automatic transmission range selector lever screw to 20 N·m (27 lb ft).

  5. Install the automatic transmission range selector lever seal.
  6. Verify that there is a positive shift gate feel in all positions.