The numbers below refers to the step numbers on the diagnostic table.
Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Defogger Schematics Connector End View Reference: Stationary Windows Connector End Views | |||
1 | Did you review the Rear Window Defogger system operation and perform the necessary inspections? | Go to Step 2 | |
2 |
Does the rear window defogger indicator illuminate? | Go to Step 3 | Go to Step 10 |
3 | Connect a test lamp between the rear window defogger grid and a good ground. Does the test lamp illuminate? | Go to Step 4 | Go to Step 5 |
4 | Connect a test lamp between the left side of the rear window defogger grid and the right side of the rear window defogger grid. Does the test lamp illuminate? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 14 |
Command the Rear Window Defogger relay ON and OFF, by depressing the rear window defogger switch on the HVAC Control Module. Do you hear a click when you command the Rear Window Defogger relay ON and OFF? | Go to Step 8 | Go to Step 6 | |
6 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 15 |
7 |
Does the test lamp illuminate? | Go to Step 13 | Go to Step 10 |
8 |
Does the test lamp illuminate? | Go to Step 9 | Go to Step 11 |
9 |
Does the test lamp illuminate? | Go to Step 13 | Go to Step 17 |
10 | Test the control circuit of the Rear Window Defogger relay for an open or short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 20 | Go to Step 12 |
11 | Test the battery positive voltage circuit of the Rear Window Defogger relay switched input for an open or short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 20 | Go to Step 16 |
12 | Inspect for a poor connection at the harness connector of the HVAC Control Module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 20 | Go to Step 18 |
13 | Inspect for a poor connection at the Rear Window Defogger relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 20 | Go to Step 19 |
14 | Repair an open or high resistance in the ground circuit of the rear window defogger grid. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 20 | -- |
15 | Repair an open or short to ground in theignition voltage circuit of the Rear Window Defogger relay coil. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 20 | -- |
16 | Repair the short to ground in the supply voltage circuit of the rear window defogger grid. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 20 | -- |
17 | Repair an open or high resistance in the supply voltage circuit of the rear window defogger grid. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 20 | -- |
18 | Replace the HVAC Control Module. Refer to HVAC Control Module Replacement in HVAC System-Manual. Did you complete the replacement? | Go to Step 20 | -- |
19 | Replace the Rear Window Defogger relay. Did you complete the replacement? | Go to Step 20 | -- |
20 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |