Removal Procedure
- Remove the IP accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
.
- Push up on the ashtray guide tension spring on both sides of the
ashtray.
- Push up on the metal housing center ashtray retaining tab.
- Pull the ashtray out of
the IP accessory trim plate.
- Disconnect the electrical connectors.
- Remove the ashtray from the IP accessory trim plate.
Installation Procedure
- Install the ashtray to
the IP accessory trim plate.
- Connect the electrical connectors.
- Press the ashtray into the IP accessory trim plate.
- Install the locking metal housing center ashtray retaining tab
to the accessory trim plate.
- Install the IP accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
.