Removal Procedure
- Disable the SIR system.
Refer to
Disabling the SIR System
.
- Remove the inflatable restraint steering wheel module. Refer to
Inflatable Restraint Steering Wheel Module Replacement
.
- Remove the steering wheel. Refer to
Steering Wheel Replacement
in Steering Wheel and Column-Tilt.
- Remove the upper and lower steering column shrouds.
- Disconnect the radio steering wheel controls inline connector
C205 located at the base of the steering column.
- Remove the wiring harness straps from the steering wheel column
wiring harness.
- Remove the retaining ring.
- Remove the inflatable restraint steering wheel module coil from
the steering shaft.
Installation Procedure
- Install the inflatable
restraint steering wheel module coil to the steering shaft.
- Install the retaining ring.
- Route the lower coil wiring harness along steering column and
install the necessary wiring harness straps.
- Connect the radio steering wheel controls inline connector C205.
- Install the upper and lower steering column shrouds.
- Install the steering wheel. Refer to
Steering Wheel Replacement
in Steering Wheel and Column-Tilt.
- Install the inflatable restraint steering wheel module. Refer
to
Inflatable Restraint Steering Wheel Module Replacement
.
- Enable the SIR system. Refer to
Enabling the SIR System
.