GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Important: Always maintain cleanliness when servicing fuel system components.


    Object Number: 50611  Size: SH
  1. Relieve fuel system pressure. Refer to Fuel Pressure Relief .
  2. Remove the fuel sender assembly (5). Refer to Fuel Sender Assembly Replacement .

  3. Object Number: 54511  Size: SH
  4. Support the reservoir with one hand and grasp the strainer with the other hand.
  5. Use a screwdriver to pry the strainer ferrule off the reservoir.
  6. Discard the strainer.

Installation Procedure


    Object Number: 50636  Size: SH
  1. Install the new strainer (4) to the reservoir.
  2. Support the reservoir with one hand and grasp the strainer with the other hand twisting the strainer into position.
  3. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  4. Inspect for fuel leaks using the following procedure:
  5. 4.1. Turn ON the ignition for 2 seconds.
    4.2. Turn OFF the ignition for 10 seconds.
    4.3. Turn ON the ignition.
    4.4. Inspect for fuel leaks.