GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the inflator fill valve access cover.
  2. Remove the lower rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side in Interior Trim.
  3. Remove the switch from the accessory inflator control panel.

  4. Object Number: 873333  Size: SH
  5. Disconnect the electrical connector (1) from the inflator switch (2).

Installation Procedure


    Object Number: 873333  Size: SH
  1. Connect the electrical connector (1) to the inflator switch (2).
  2. Install the inflator switch in the accessory inflator control panel.
  3. Install the lower rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side in Interior Trim.
  4. Install the inflator fill valve access cover.