Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
- Disable the SIR system. Refer to
SIR Disabling and Enabling
in SIR.
- Remove the steering wheel from the steering column. Refer to
Steering Wheel Replacement
.
- Remove the tilt lever assembly. Refer to
Tilt Lever Replacement
.
- Remove the 2 pan head tapping screws (2) from the
lower trim cover (1).
- Remove the lower trim cover (1).
- Remove the TORX® head
screw (1) from the upper trim cover (2).
- Remove the upper trim cover (2).
- If necessary, remove the
trim cover protector (1) from the lower trim cover (2).
- Remove the shift lever. Refer to
Shift Lever Replacement
.
Installation Procedure
- If necessary, install
the trim cover protector (1) to the lower trim cover (2).
- Install the shift lever. Refer to
Shift Lever Replacement
.
Notice: Refer to Fastener Notice in the Preface section.
- Install the upper trim cover (2) and secure by using the TORX®
head screw (1).
Tighten
Tighten the screw to 1.5 N·m (13 lb in).
- Install the lower trim
cover (1) and secure by using 2 pan head tapping screws (2).
Tighten
Tighten the screws to 3.5 N·m (31 lb in).
- Install the tilt lever assembly. Refer to
Tilt Lever Replacement
.
- Install the steering wheel onto the column. Refer to
Steering Wheel Replacement
.
- Enable the SIR system. Refer to
SIR Disabling and Enabling
in SIR.