GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Venture Ext. 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Wiper Module Cover Replacement

Removal Procedure

    Object Number: 776385 Size: SH
  1. Open the hood.
  2. Remove the hood rear seal part way to gain access to the wiper drive system module cover retainers.
  3. Remove the wiper drive system module cover from the pinchweld flange.
  4. Remove the wiper drive system module cover from the engine compartment.

Installation Procedure

    Object Number: 776385 Size: SH
  1. Position the wiper drive system module cover to the pinchweld flange.
  2. Install the wiper drive system module cover to the pinchweld flange, pressing down until fully seated.
  3. Install the hood rear seal to the pinchweld flange.
  4. Close the hood.