Instrument Panel Electrical Center or Junction Block Replacement for Chevrolet Venture Ext. 2003

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
2. Remove the fuse block I/P end cover.



3. Release the front retainer on the fuse block.



4. Push the fuse block into the instrument panel.
5. Remove the fuse block from the instrument panel.
6. Remove the electrical connectors from the fuse block. Refer to Connector Repairs .

1. Install the electrical connectors into the fuse block. Refer to Connector Repairs .



2. Align the rear side of the fuse block with the instrument panel.
3. Push the fuse block into the opening until secure.
4. Install the I/P end cover.
5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.