GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Venture Ext. 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Rear License Plate Lamp Replacement

Removal Procedure

    Object Number: 388902 Size: SH
  1. Remove the screws from the license lamp lens.
  2. Remove the license lamp lens from the liftgate.
  3. Pull the bulb from the license lamp socket.

Installation Procedure

    Object Number: 388902 Size: SH
  1. Press the bulb into the license lamp socket.
  2. Install the license lamp lens to the liftgate.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the license lamp lens.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).