GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Venture Ext. 🢒 Body and Accessories 🢒 Horns 🢒 Horn Replacement

Removal Procedure
  1. Remove the right or left headlamp. Refer to Headlamp Assembly or Headlamp Bulb Replacement in Lighting Systems.

    2. Object Number: 812636 Size: SH
  2. Disconnect the horn electrical connector.
  3. Remove the horn bracket bolt.
  4. Remove the horn from the front impact bar.

Installation Procedure

    Object Number: 812636 Size: SH
  1. Position the horn to the front impact bar.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the horn bracket bolt.

    3. Tighten
    Tighten the bolt to 15 N·m (11 lb ft).

  3. Connect the horn electrical connector.
  4. Install the right or left headlamp. Refer to Headlamp Assembly or Headlamp Bulb Replacement in Lighting Systems.