Notice: Proper stoplamp switch adjustment is essential. Improper stoplamp switch
adjustment may cause brake drag, heat buildup and excessive brake lining wear.
- Remove the left side instrument panel insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel, Gages
and Console.
- Rotate the switch counter-clockwise until the travel stop is reached (approximately
60 degrees).
Important: Do NOT move or push the brake pedal.
- Insert the switch into the retainer until the switch plunger is fully depressed
into the switch barrel.
- Rotate the switch until the travel stop is reached (approximately 60 degrees).
The electrical connector index notch should be at the 12 o'clock position.
- Ensure that the cruise control system operates properly.
- Install the left side instrument panel insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument
Panel, Gages and Console.