Removal Procedure
- Open and support the hood.
- Remove the hood latch cable from the hood
latch.
- Remove the hood latch cable retaining clips.
- Attach a length of mechanics wire to the hood latch cable prior to removal.
This lead will assist in reinstallation of the new hood latch cable.
- Remove the hood release handle. Refer to
Hood Primary Latch Release Cable Handle Replacement
.
- Remove the hood latch cable and grommet
rearward from the passenger compartment.
- Transfer the lead wire to the new hood latch
cable.
Installation Procedure
- Using the lead wire, pull the new hood latch
cable through the cowl and into the engine compartment.
- Seat the grommet fully into the cowl.
- Install the hood release handle. Refer to
Hood Primary Latch Release Cable Handle Replacement
.
- Install the hood latch cable to the hood
latch.
- Install the hood latch cable retaining clips.
- Close the hood.