Front Side Door Adjustment Door Side

1. Loosen the (13 mm) bolts from the upper and lower door side hinge.

DO NOT remove the bolts.

2. Adjust the door as needed by repositioning the door in the following manner:

•	Up or down

•

In or out

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Retighten the (13 mm) upper bolts.

Tighten
Tighten the 13 mm bolts to 33 N·m (24 lb ft).

2. Retighten the (13 mm) lower bolts.

Tighten
Tighten the 13 mm bolts to 33 N·m (24 lb ft).