GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the cup holder, if equipped. Refer to Rear Seat Cup Holder Replacement .
  2. Remove the finish cover screws.
  3. Remove the finish covers from the seat frame.

Installation Procedure

  1. Install the finish covers to the seat frame.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the finish cover screws.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the cup holder, if equipped. Refer to Rear Seat Cup Holder Replacement .