Schematic Reference: Interior Lights Schematics

Connector End View Reference: Master Electrical Component List in Wiring Systems.

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

1. Turn the ignition switch to the RUN position.
2. Turn the interior lamps override switch to the ON position.
3. Remove the instrument panel (I/P) compartment lamp bulb.
4. Using a test lamp probe between the interior lamps switched voltage supply circuit and the ground circuit of the I/P compartment lamp bulb socket.

Does the test lamp illuminate?

Go to Step 7

Go to Step 3

1. Disconnect the I/P compartment lamp connector.
2. Using a test lamp connected to ground, probe the interior lamps switched voltage supply circuit of the I/P compartment lamp connector.

Does the test lamp illuminate?

Go to Step 4

Go to Step 5

Using a test lamp, probe between the interior lamps switched voltage supply circuit and the ground circuit of the I/P compartment lamp connector.

Does the test lamp illuminate?

Go to Step 8

Go to Step 6

Repair the open or high resistance in the supply voltage circuit of the I/P compartment lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Is the repair complete?

Go to Step 9

--

Repair the open or high resistance in the ground circuit of the I/P compartment lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Is the repair complete?

Go to Step 9

--

Replace the I/P compartment lamp bulb.

Is the repair complete?

Go to Step 9

--

Replace the I/P compartment lamp assembly. Refer to Instrument Panel Compartment Lamp Replacement .

Is the repair complete?

Go to Step 9

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2