GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Venture - 4WD 🢒 Body and Accessories 🢒 Frame and Underbody 🢒 Assist Step Replacement

Removal Procedure

    Object Number: 759867 Size: SH
  1. Remove the assist step nuts.
  2. Remove the assist step from the assist step brackets.

Installation Procedure

    Object Number: 759867 Size: SH
  1. Position the assist step to the assist step brackets.
  2. Install the assist step nuts and hand tighten.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Align the ends of the assist step bar 10 mm from the rocker panel.

    4. Tighten
    Tighten the assist step nuts to 10 N·m (89 lb in).