GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Venture - 4WD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure
  1. Remove the instrument panel (IP) upper trim. Refer to Instrument Panel Upper Trim Pad Replacement.

    2. Object Number: 315296 Size: SH
  2. Disengage the retaining tabs in order to remove the door lock receiver from the I/P upper trim.
  3. Disconnect the electrical connector from the door lock receiver.

Installation Procedure

    Object Number: 315296 Size: SH
  1. Connect the electrical connector to the door lock receiver.
  2. Engage the retaining tabs in order to install the door lock receiver to the IP upper trim.
  3. Install the I/P upper trim. Refer to Instrument Panel Upper Trim Pad Replacement.
  4. Program transmitter to the new receiver. Refer to Transmitter Programming.
  5. Refer to Control Module References for programming and setup information.