If a weld stud is damaged during a repair procedure, perform the following steps in order to replace the weld stud:

Caution: Wear safety glasses in order to avoid eye damage.

1. Drill a hole into the same location as the damaged weld stud.
2. Drive a screw into the drilled hole.
3. Use a screw to retain the following components:

•

The clips

•	The moldings

•	Other components

4. If the surface is damaged, repair and paint the surface as needed in order to provide a smooth surface. Refer to Anti-Corrosion Treatment and Repair in Paint/Coatings.