Removal Procedure
Notice: Refer to Fuel Pressure Notice in the Preface section.
- Relieve the fuel system pressure. Refer to
Fuel Pressure Relief
.
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the fuel filter mounting bracket assembly bolt.
- Disconnect the inlet/outlet fuel lines by moving the line connector lock forward and pulling the hose off of the fuel filter tube.
Installation Procedure
- Install the new fuel filter into the retaining clamp. Note the flow direction.
- Install the fuel filter.
- Connect the inlet/outlet lines. Secure the lines with the connector lock.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fuel filter mounting bracket assembly bolt.
Tighten
Tighten the fuel filter mounting bracket assembly bolts to 10 N·m (89 lb in).
- Connect the negative battery cable.
- Perform a leak test of the fuel filter.