GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Vivant 🢒 Engine 🢒 Engine Controls - 2.0L (L34 GMDAT) 🢒 Crankshaft Position Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1263892 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the injector channel cover. Refer to Fuel Injection Fuel Rail Assembly Replacement .
  3. Disconnect the crankshaft position (CKP) sensor connector.
  4. Remove the front exhaust pipe. Refer to Front Pipe Replacement .
  5. Remove the CKP sensor retaining bolt.
  6. Remove the CKP sensor.

Installation Procedure

    Object Number: 1225008 Size: SH
  1. Install the CKP sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CKP sensor retaining bolt.

    3. Tighten
    Tighten the CKP sensor retaining bolt to 8 N·m (71 lb in).

  3. Connect the CKP sensor connector.
  4. Connect the negative battery cable.