Tools Required

J 21104-B , KM-475-B Weather Strip Remover Universal or Equivalent

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the outer handle grip.
3. Remove the screws.
4. Remove the inner handle grip.



5. Remove the screws and the keys securing the trim panel.
6. Disconnect the power window control electrical connector.
7. Remove the trim panel using J 21104-B  (1) .

1. Connect the power window control electrical connector.
2. Position the trim panel to the door.
3. Install the screws and keys into the trim.



4. Install the inner handle grip.
5. Install the screws.
6. Install the outer handle grip.
7. Connect the negative battery cable.