Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the instrument panel (I/P) lower cover.
- Remove the bolts and the immobilizer control unit (ICU).
- Disconnect the electrical connectors from the ICU.
Installation Procedure
- Install the I/P lower cover.
Notice: Refer to Fastener Notice in the Preface section.
- Install the ICU and the bolts.
Tighten
Tighten the bolts to 4N·m (35 lb in).
Important: After replacing the ICU, re-authorize the
keys using the key coding procedure. Refer to
Programming Additional Keys
.
- Connect the electrical connectors to the ICU.
- Connect the negative battery cable.