GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1280301  Size: SH
  1. Remove the plastic cap to reveal the seat belt lower anchor bolt.
  2. Remove the bolt, washer, spacer, and lower anchor bolt.

  3. Object Number: 1280302  Size: SH
  4. Remove the rear cargo area trim panel. Refer to Cargo Area Rear Trim Panel Replacement .
  5. Remove the bolt, washers, screw, and seat belt retractor.

  6. Object Number: 1280303  Size: SH
  7. Remove the plastic cap to reveal the bolt.
  8. Remove the bolt, spacers, washer, and upper anchor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1280303  Size: SH
  1. Install the bolt, spacers, washer, and upper anchor.
  2. Tighten
    Tighten the bolt to 38 N·m (28 lb ft).

  3. Install the plastic cap to cover the bolt.

  4. Object Number: 1280302  Size: SH
  5. Install the bolt, washers, screw, and seat belt retractor.
  6. Tighten
    Tighten the bolt to 38 N·m (28 lb ft).

  7. Install the rear cargo area trim panel. Refer to Cargo Area Rear Trim Panel Replacement .

  8. Object Number: 1280301  Size: SH
  9. Install the bolt, washer, spacer, and lower anchor bolt.
  10. Tighten
    Tighten the bolt to 38 N·m (28 lb ft).

  11. Install the plastic cap to cover the seat belt lower anchor bolt.