1

1. Leave the seat belt unbuckled.
2. Close the door of the vehicle.
3. Turn ON the ignition.

Is the seat belt warning lamp ON?

--

Go to Step 2

Go to Step 4

1. Turn ON the head lamp.
2. Open the door.

Does the chime work?

--

Go to Step 3

Go to Step 4

Repair the open circuit between terminal 2 of S204 and terminal 1 of the chime module.

Is the repair complete?

--

System OK

--

Inspect the warning chime fuse F16.

Is fuse F16 open?

--

Go to Step 6

Go to Step 5

1. Inspect for a short circuit and repair if necessary.
2. Replace the fuse.

Is the repair complete?

--

System OK

--

1. Turn ON the ignition switch.
2. Measure the voltage at fuse F16.

Is the voltage equal to the specified value?

11-14 V

Go to Step 8

Go to Step 7

Repair the open power supply circuit for fuse F16.

Is the repair complete?

--

System OK

--

1. Turn OFF the ignition switch.
2. Disconnect the chime module connector.
3. Measure the resistance between terminal 8 of the chime module and fuse F16.

Is the resistance equal to the specified value?

0 ohms

Go to Step 10

Go to Step 9

Repair the open circuit between terminal 8 of the chime module and fuse F16.

Is the repair complete?

--

System OK

--

With the chime module connector disconnected, measure the resistance between terminal 5 of the chime module and ground.

Is the resistance equal to the specified value?

0 ohms

Go to Step 12

Go to Step 11

Repair the open circuit between terminal 5 of the chime module and ground.

Is the repair complete?

--

System OK

--

Replace the chime module.

Is the repair complete?

--

System OK

--