GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Vivant 🢒 General Information 🢒 General Information 🢒 Rear Wheel Speed Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1265740 Size: SH
  1. Disconnect the negative battery cable.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Disconnect the rear wheel speed sensor electrical connector from the rear axle.

    4. Object Number: 1265741 Size: SH
  4. Remove the rear wheel speed sensor cable grommets.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1265741 Size: SH
  1. Install the rear wheel speed sensor cable grommets and bolt.

    2. Tighten
    Tighten the bolt to 9 N·m (80 lb in).


    Object Number: 1265740 Size: SH
  2. Connect the rear wheel speed sensor electrical connector to the rear axle.
  3. Connect the negative battery cable.