Exhaust Gas Recirculation Valve Replacement Non European Emissions

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Disconnect the vacuum hose from the exhaust gas recirculation (EGR) valve.
3. Remove the EGR valve retaining bolts.
4. Remove the EGR valve.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the EGR valve with the bolts.

Tighten
Tighten the electrical EGR valve retaining bolts to 30 N·m (22 lb ft).

2. Connect the vacuum hose to the EGR valve.
3. Connect the EGR valve electrical connector.
4. Connect the negative battery cable.

Exhaust Gas Recirculation Valve Replacement European Emissions

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Disconnect the electrical exhaust gas recirculation (EGR) valve electrical connector.
3. Remove the EGR valve retaining bolts.
4. Remove the EGR valve.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the EGR valve with the bolts.

Tighten
Tighten the electrical EGR valve retaining bolts to 30 N·m (22 lb ft).

2. Connect the EGR valve electrical connector.
3. Connect the negative battery cable.